Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
left border  


US Bellows, Inc. Designed and Fabricated 14 Single Reinforced Metal Expansion Joints for a Construction Company in Israel(PT&P Ref #00540, A1, RF) 11/30/2005

Single Reinforced Metal Expansion Joints Multiple Expansion Joints

These single reinforced expansion joints with equalizing rings are used in heat exchangers. The bellows are fabricated from ASTM B 443 Inconel 625 LCF. The weld ends and the reinforcing rings/root rings are carbon steel. The expansion joints are 52” and 57” diameter with an overall length of 15 ½” and 16 ½”. They are capable of moving 0.6” in extension at 158 PSIG at 300°F. The expansion joints were fabricated to ASME Section VIII. The bellows and pipe longitudinal weld seams were 100% X-Rayed. In addition, the expansion joints were 100% dye-penetrate examined and hydrotested to 205 PSIG for quality and performance assurance.




U.S. Bellows Request for Quotation

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces

Copyright © 2018  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy