border  
border
 
 
 
Loading

Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
Facebook
left border  
 

FEATURED PRODUCT ARCHIVES >>

U.S. Bellows, Inc. Designed and Fabricated Two Fabric Expansion Joints for an Oil Refinery in Saudi Arabia (PT&P Ref #81186) 3/01/2006

Expansion Joint Assembly  
2 Fabric Expansion Joints
 

Expansion Joint Assembly These are 24" diameter fabric expansion joints with an overall face to face dimension of 12". Each expansion joint weighs 300 lb. Installed in the inlet and exhaust piping of a hot air blower, they can withstand temperatures of up to 850°F. These expansion joints were fabricated in three layers that consisted of aluminized fiberglass, ceramic fiber, and silica treated fabrics. The flanges were fabricated from carbon steel with special hex nuts welded to the inside of the bolt holes. The stud bolts are in place to assure correct alignment of the bolts to the flange bolt holes. Visual inspection and trial fitting of the stud bolts were performed to assure quality and performance.
 

U.S. Bellows Request for Quotation
  First Name *
 
  Last Name *
 
  Email *
 
  Phone *
 
  Item Description & Quantities *
 
  Date Quote Needed By *
 
border
border
   
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy