border  
border
 
 
 
Loading

Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
Facebook
left border  
 

FEATURED PRODUCT ARCHIVES >>

U.S. Bellows, Inc. Designed and Fabricated two Expansion Joints for an Air Intake on a Generator Unit at a Packaged Power facility in Houston.(PT&P Ref #87025) 7/11/2006

Expansion Joints for an Air Intake on a Generator

Expansion Joints for an Air Intake on a Generator These 59" x 39.5" fabric expansion joints were fabricated using a 1/8" thick neoprene sheet. The joints were then bonded to the carbon steel angles and plates, and secured using stainless steel band clamps, with T-bolt latches. The carbon steel angles and plates were primed and finished at U.S. Bellows, Inc.'s paint production facility.

The expansion joints were designed to facilitate any vibration and movement during the generator units' normal operation.

 

 

 

U.S. Bellows Request for Quotation
border
border
   
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy