Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
left border  


U.S. Bellows, Inc. Designed and Fabricated Many Expansion Joints for an Engineering and Construction Company (PT&P Ref #85290) 8/16/2006

Tied Universal Expansion Joints

These pictures display one of many tied universal expansion joints in a large order of expansion joints designed by U.S. Bellows, Inc. for a local engineering and construction company. These expansion joints weigh 1,600 lb. each and are 10" in diameter. They are designed for 611 PSIG and temperatures up to 180°F. These expansion joints are fabricated from 321 carbon steel pipe, tie rods and 300 lb. RF weld neck flanges. The bellows longitudinal seams were 100% x-rayed and the complete assembly was hydro-tested to 917 PSIG to ensure a quality product and performance. The units were shipped with the mating flanges bolted to the end of the assembly.




U.S. Bellows Request for Quotation

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces

Copyright © 2018  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy