border  
border
 
 
 
Loading

Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
Facebook
left border  
 

FEATURED PRODUCT ARCHIVES >>

Fabric Expansion Joints Custom Designed for an Offshore Oil Extraction and Natural Gas Project (PT&P Ref#112416) 10/20/2012
Fabric Expansion Joints Custom Designed for an Offshore Oil Extraction and Natural Gas Project

These fabric expansion joints were custom designed for an offshore oil extraction and natural gas project. They are 105" dia. x 24" O.A.L. 309 stainless steel was used for the duct, 310 for the liners, 316 for the covers, 321 for the studs, 309 for the flanges. The fabric belt was a three layer belt with an inner layer of glass cloth, a layer of KO wool and an outside layer of reinforced PTFE. The expansion joints were designed for 1 psig at a temperature of 1100°F. They The were designed for 4" axial compression, a 1" extension, and a 0.5" lateral offset. All welds were dye penetrant examined.

 

 

 

U.S. Bellows Request for Quotation
border
border
   
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy