border  
border
 
 
 
Loading

Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
Facebook
left border  
 

FEATURED PRODUCT ARCHIVES >>

Elbow Pressure Balanced Expansion Joint Designed for a Chemical Processing Plant (PT&P Ref#127110) 11/16/2013
Pressure Balanced Tee Expansion Joint Designed for a Boiler Feed Pump Turbine Exhaust

This elbow pressure balanced expansion joint was designed for a chemical processing plant to aid the nitrogen oxide process for compound fertilizers. It is 18" diameter with a face of weld-end to centerline of elbow length of 83- 3/8". The body of the assembly, the pipe, covers and tie-rods were fabricated from 304L stainless steel, the bellows and liners from 321 stainless. This unit was designed for 1/2" compression and 4-1/8" lateral movement with an operating temperature of 600°F at 125 psig. The assembly was dye penetrant tested and hydro-tested at 190 psig prior to shipment.

 

 

 

U.S. Bellows Request for Quotation
border
border
   
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy