border  
border
 
 
 
Loading

Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
Facebook
left border  
 

FEATURED PRODUCT ARCHIVES >>

42" Dia. Hinged Universal Expansion Joint Designed with Pantographic Linkage (PT&P Ref#129524v2) 8/4/2014
42" Dia. Hinged Universal Expansion Joint Designed with Pantographic Linkage

This 42" dia. hinged universal expansion joint was designed with pantographic linkage flue gas application in a Columbian refinery. The redundant two-ply testable bellows are fabricated from Inconel 625 LCF and the remainder of the assembly was fabricated with refractory lined carbon steel. It is designed for an axial movement of 1.1" at 1,000°F and 50 psig. All welds were 100% dye penetrant examined, the bellows longitudinal seam and pipe seams were 100% X-ray examined. The complete assembly was pneumatically tested to 50 psig due to the internal insulation. All the pressure bearing components such as the hinge plates, pantrographic linkage, gimbal ring and hinge support rings were designed and engineered per latest EJMA, ASME B31.3 codes.

 

 

U.S. Bellows Request for Quotation
border
border
   
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy