Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla español
left border  


Custom-Designed Single Flanged Expansion Joints (PT&P Ref#157943) 10/12/2020
Custom-Designed Single Flanged Expansion Joints
 Type: Single Flanged Expansion Joint
 Size: 6" to 18" Dia. Range
 Material: 321 Stainless Steel | 304 SS | 316 SS

1055°F | 2 psig | 5/8 " Axial Travel | 5/8" Lateral Offse

U.S. Bellows provided single expansion joints custom-designed for an oil refinery. The 12” diameter bellows are fabricated from 321 stainless steel, the liner is 304 stainless and the flanges are fabricated from carbon steel. The remaining bellows ranged in diameter from 6” to 18” and were fabricated with 316 stainless steel bellows, liners, and flanges. Design conditions: design temperature = 1055°F, operating pressure = 2 psig, axial travel = 5/8”, lateral offset = 5/8”. Each unit was hydrostatically tested prior to shipment. U.S. Bellows provides expansion joint solutions for all markets and applications including biofuels/bioenergy, carbon black industry, paper mills, sugar mills, and waste water management.



U.S. Bellows Request for Quotation

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces

Copyright © 2018  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy