48" Triple Layered Fabric Expansion Joints — The Expansion Joints Blog
Home > Fabric Expansion Joints > 48" Triple Layered Fabric Expansion Joints

48" Triple Layered Fabric Expansion Joints

October 19th, 2001

48" Triple Layered Fabric Expansion Joints

48" Triple Layered Fabric Expansion Joints

U.S. Bellows, Inc., the expansion joint division of Piping Technology & Products, Inc., designed and fabricated two 48-inch, triple layered fabric expansion joints for a power plant in Columbia to be used in its exhaust system. The expansion joints were fabricated with three layers: outer, center and inner. The outer layers consisted of PTFE, 25% glass filled, coated fiberglass, center layers of ceramic fiberglass and the inner layers of aluminum coated fiberglass. These expansion joints were designed at a pressure of 27”of WC and a temperature of 700oF.

Comments are closed.
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy