July — 2002 — The Expansion Joints Blog

Archive

Archive for July, 2002

Three Elbow Pressure Balanced Expansion Joints for a Power Station in Canada

July 26th, 2002 Comments off
Three Elbow Pressure Balanced Expansion Joints for a Power Station in Canada

Three Elbow Pressure Balanced Expansion Joints for a Power Station in Canada

U.S Bellows, Inc, the expansion joint division of Piping Technology & Products, Inc., recently designed and fabricated three elbow pressure balanced expansion joints for a power station in Canada.

These joints are designed at 150 PSIG and 450ºF to allow lateral and axial movements in a 42″ steam line. Expansion joints were designed and fabricated per EJMA and B31.1 code. The expansion joints were hydro-tested at 225 PSIG and 75ºF. In order to detect any leaks in the weld, prior to and following forming, bellows long seam welds and attachment welds were 100% dye-penetrant tested.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy