Clamshell Bellows for a Shell and Tube Heat Exchanger — The Expansion Joints Blog
Home > Clamshell Bellows, Metallic Expansion Joints > Clamshell Bellows for a Shell and Tube Heat Exchanger

Clamshell Bellows for a Shell and Tube Heat Exchanger

August 9th, 2002

Clam Shell Bellows for a Shell and Tube Heat Exchanger

Clam Shell Bellows for a Shell and Tube Heat Exchanger

U.S. Bellows, Inc fabricated and installed a clam shell bellows for a shell and tube heat exchanger. The clam shell bellows is designed and fabricated per ASME VIII Div. 1 appendix 26. It has a 14″ diameter and was designed at 150ºF and 150 psig. In order to detect any leaks, prior to and following forming, the heat exchanger and its welds were subjected to a series of tests such as the dye penetrant test (100%), X-ray test (100%) and air test.

Comments are closed.
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy