Refractory-lined Expansion Joint for an FFC Unit in India — The Expansion Joints Blog
Home > Refractory-Lined Expansion Joints > Refractory-lined Expansion Joint for an FFC Unit in India

Refractory-lined Expansion Joint for an FFC Unit in India

May 2nd, 2003

Refractory-lined Expansion Joint for an FFC Unit in India

Refractory-lined Expansion Joint for an FFC Unit in India

U.S. Bellows, Inc. designed and fabricated this refractory lined universal expansion joint for an FFC unit in India.Ā  This is a 70″, outside diameter, tied refractory-lined universal expansion joint with two-ply InconelĀ® 625 LCF bellows, A516 weld ends and spool, and a 4″ thick refractory lining per UOP specifications. This joint was designed at 51 PSIG and 1400 degrees F. Bellows long seam welds were 100% x-rayed and 100% dye-penetrant before and after forming. It was also pneumatic tested at 57 PSIG. The refractory lining was dried out per UOP specifications.

Comments are closed.
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy