June — 2004 — The Expansion Joints Blog

Archive

Archive for June, 2004

60" Diameter Tied Refractory Lined Universal Expansion Joints for a Chemical Refinery in Texas

June 11th, 2004 Comments off
60" diameter Tied Refractory Lined Universal Expansion Joints for a Chemical Refinery in TX

60" diameter Tied Refractory Lined Universal Expansion Joints for a Chemical Refinery in TX

U.S. Bellows, Inc. recently fabricated 60 dia. refractory lined universal expansion joints for a carbon monoxide ducting system at a chemical refinery.  The expansion joints are lined with a 3/4″ thick abrasion resistant refractory lining with hexagonal mesh reinforced anchor. A240 TP 304 material was used to fabricate the bellows and flanges and A240 TP 310 material was used for the spool. Designed for 2 PSIG, the joints were air tested at 5 PSIG to ensure quality performance. A dye-penetrant test was also implemented on the bellows’ long seam and attachment welds. These expansion joints were fabricated and designed per B31.3 and EJMA standards.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy