3 Fabric Expansion Joints for a Power Company in Texas — The Expansion Joints Blog
Home > Fabric Expansion Joints > 3 Fabric Expansion Joints for a Power Company in Texas

3 Fabric Expansion Joints for a Power Company in Texas

November 9th, 2005

3 Fabric Expansion Joints for a Power Company in Texas

3 Fabric Expansion Joints for a Power Company in Texas

These fabric expansion joints are made of stainless steel liner, flanged ends, backing bars, and PTFE impregnated fiberglass. They weigh between 370 lbs – 380 lbs and measure 81.15″ long, 18.44″ wide, and 16″ high. They are used in high temperature air ducts to allow for expansion. Its thermal growth consists of +/- 1/8 X-Y-Z directions. It is capable of withstanding 400°F at +/- 0.8 PSIG at a maximum flow of 130,650 ACFM. Standard testing was performed for quality assurance.

Comments are closed.
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy