August — 2006 — The Expansion Joints Blog

Archive

Archive for August, 2006

U.S. Bellows, Inc. Designed and Fabricated Many Expansion Joints for an Engineering and Construction Company

August 16th, 2006 Comments off
Universal Expansion Joints for an Engineering and Construction Company

Universal Expansion Joints for an Engineering and Construction Company

Universal Expansion Joints for an Engineering and Construction Company

Universal Expansion Joints for an Engineering and Construction Company

These pictures display one of many tied universal expansion joints in a large order of expansion joints designed by U.S. Bellows, Inc. for a local engineering and construction company. These expansion joints weigh 1,600 lbs. each and are 10 inches in diameter. They are designed for 611 PSIG and temperatures up to 180°F. These expansion joints are fabricated from 321 carbon steel pipe, tie rods and 300 lb. RF weld neck flanges. The bellows longitudinal seams were 100% x-rayed and the complete assembly was hydro-tested to 917 PSIG to ensure a quality product and performance. The units were shipped with the mating flanges bolted to the end of the assembly.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy