January — 2007 — The Expansion Joints Blog

Archive

Archive for January, 2007

Thick Wall Flanged and Flued Head Expansion Joints

January 17th, 2007 Comments off
Thick Wall Flanged and Flued Head Expansion Joints

Thick Wall Flanged and Flued Head Expansion Joints

U.S. Bellows, Inc. designed and fabricated two 78″ I.D. x 110″ O.D. and two 36″ I.D. x 68″ O.D. thick wall flanged and flued head expansion joints. All four expansion joints were fabricated from 1/4″ thick ASTM A516 grade 70 carbon steel plate. The expansion joints were cold formed and heat treated to customer requirements. The external surface of the expansion joint was painted with one coat of shop primer. The weld ends of the expansion joint are beveled, and drainage plugs are installed in the crest of the bellows. The bellows long weld seams were 100% dye-penetrant and 100% x-ray tested. U.S. Bellows provides 100% customer satisfaction in terms of quality and delivery.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy