October — 2007 — The Expansion Joints Blog

Archive

Archive for October, 2007

10"-16" Tied Universal Expansion Joints for a Nitrogen Plant in Arizona

October 24th, 2007 Comments off
10" Tied Universal Expansion Joints for a Nitrogen Plant in Arizona

10" Tied Universal Expansion Joints for a Nitrogen Plant in Arizona

U.S. Bellows, Inc. designed and fabricated tied universal expansion joints with stainless steel flanges. All of the expansion joints were dye-penetrant examined and hydro-tested to ensure product quality.

10″ Expansion Joint:
- 347 Stainless Steel Bellows
- 316H Stainless Steel Pipe
- 10″ NPS x 74 5/8″ OAL

14" Tied Universal Expansion Joints for a Nitrogen Plant in Arizona

14" Tied Universal Expansion Joints for a Nitrogen Plant in Arizona

14″ Expansion Joint:
- 321 Stainless Steel Bellows
- 304L Stainless Steel Pipe
- 14″ NPS x 168″OAL

12" Tied Universal Expansion Joint

12" Tied Universal Expansion Joint

Expansion Joint- 12″:
- 321 Stainless Steel Bellows
- 304L Stainless Steel Pipe
- 12″ NPS x 90″ OAL

16" Tied Universal Expansion Joint

16" Tied Universal Expansion Joint

16″ Expansion Joint:
- 321 Stainless Steel Bellows
- 304L Stainless Steel Pipe
- 16″ NPS x 126″ OAL

10" Tied Universal Expansion Joint

10" Tied Universal Expansion Joint

10″ Expansion Joint:
- 321 Stainless Steel Bellows
- 304L Stainless Steel Pipe
- 10″ NPS x 140 3/8″ OAL

32″ Universal and 3″ Single Expansion Joints for an Epoxy Resin Plant in Saudi Arabia

October 3rd, 2007 Comments off
Expansion Joints for an Epoxy Resin Plant in Saudi Arabia

Expansion Joints for an Epoxy Resin Plant in Saudi Arabia

U.S. Bellows, Inc. designed and fabricated a 32″ universal expansion joint and 3″ single expansion joints to be utilized in a new epoxy resin plant in Saudi Arabia. The expansion joints are fabricated with stainless steel bellows and carbon and stainless steel flanges. The 32″ expansion joint has a design temperature of 482ºF with a design pressure of 15 PSIG. The 3″ single expansion joints have a design temperature of 400ºF with a design pressure of 370 PSIG.

The flanges on the 32″ universal expansion joint were custom fabricated to the customer’s special design requirements. One end of the 32″ expansion joint has a stainless steel custom machined flange with a grooved facing. The other end has a carbon steel lap joint flange. Each expansion joint was 100% dye-penetrant tested as well as hydro-tested.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy