This fabric expansion joint is 13′ long by 5′ wide, and 21″ deep. The frame and liner are fabricated from 304 stainless steel, and the belt is a fiber glass reinforced PTFE material. Prior to shipping for installation in a power generator unit, all the welds were dye penetrant examined.
The Expansion Joint Selection Chart is a great tool for saving time when trying to narrow down your many options. Simply scan the chart for the movement your application requires, then read the description for further details on deflections, pressure thrust forces, etc.
This tied universal expansion joint will be installed in an oil refinery in Louisiana. The assembly is 48″ in diameter and 150″ long. The bellows are fabricated from two plies of Inconel 625 LCF with stainless steel mesh between the plies and the weld ends and all hardware are A 516 GR 70 carbon steel. The design temperature is 500°F at 38 PSIG with 5″ lateral movement. The bellows were 100% x-rayed and hydro-tested to 76 PSIG. A pneumatic test between the plies at 15 PSIG was performed prior to shipping.