78 Inch Fabric Expansion Joint and Duct Work Assembly with a 90° Elbow for a Sulphuric Acid Plant
April 11th, 2011
U.S. Bellows designed and fabricated a 78″ fabric expansion joint and duct work assembly with a 90° elbow for a sulphuric acid plant in Louisiana. A stress anaylsis was performed to determine thermal movements and spring supports, loads and travel.
The ducts are fabricated from carbon steel and are 30′ long. The expansion joint is designed for 750°F at 5 PSIG with 2.5″ lateral deflection (cold preset) and 2″ axial compression. Cradle supports and a “big ton” spring support were also fabricated for this project.