Duct Work for Absorbing Tower Piping in an Acid Plant — The Expansion Joints Blog
Home > Duct Work > Duct Work for Absorbing Tower Piping in an Acid Plant

Duct Work for Absorbing Tower Piping in an Acid Plant

May 9th, 2011

Duct Work for Absorbing Tower Piping in an Acid Plant

This duct work was fabricated with mitered elbows from SA-516 grade 70 carbon steel, and was designed for absorbing tower piping in an acid plant. It has a 72″ outside diameter and measures 23′-2/4″ from the centerline, elbow to elbow. This assembly was only a single portion of a duct work system that included 36″, 48″ and 60″ diameter sections of fabricated duct work. The duct work was fabricated with roundness tolerance of +/- 1/8″. A 100% dye penetrant test, soap and air test, and spot x-ray testing of all pipe circumferential and long seam welds was performed prior to shipment.

Duct Work for Absorbing Tower Piping in an Acid Plant

Categories: Duct Work Tags:
Comments are closed.
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy