Hinged Universal Expansion Joint and Duct Work Assembly Custom Designed for an Exhaust Duct Application — The Expansion Joints Blog
Home > Hinged Expansion Joints, Universal Expansion Joints > Hinged Universal Expansion Joint and Duct Work Assembly Custom Designed for an Exhaust Duct Application

Hinged Universal Expansion Joint and Duct Work Assembly Custom Designed for an Exhaust Duct Application

July 25th, 2011

Custom Universal Expansion Joint and Duct Work Assembly

 

This week’s featured product is on a hinged universal expansion joint and duct work assembly custom designed for an exhaust duct application in a power plant in Kenya. The hinge hardware was fabricated from carbon steel, while the rest of the unit was fabricated from 316 stainless steel with Inconel 625 bellows. An F-type variable spring was also provided for this project and will be used to support the center spool between the two elbows. The duct work with expansion joint is 36″ in diameter and the distance between the centerline of the two 90 degree elbows is 240″. It is designed for 20 psig at 115°F and 1/2 degree of angular movement. The entire assembly was 100% dye penetrant tested and a soap and air test was performed prior to shipment.

Custom Universal Expansion Joint and Duct Work Assembly F Type Variable Spring

Comments are closed.
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy