The Expansion Joints Blog

Fabric Expansion Joint Custom Designed for an Exhaust Application in a Gas Turbine Facility

November 2nd, 2013 Comments off

Fabric Expansion Joint Custom Designed for an Exhaust Application in a Gas Turbine Facility

This 153″ x 55″ x 21″ fabric expansion joint was custom designed for an exhaust application in a gas turbine facility overseas. It is fabricated from carbon steel with a painted frame and liner. The fabric belt is reinforced neoprene, and it’s designed for +/- 100″ water column with a temperature of -20°F to 600°F. A dye penetrant examination and paint thickness test was conducted on the assembly before being shipped.

24″ Dia. Universal Expansion Joint Designed for a Refinery in Europe

October 12th, 2013 Comments off

24" Dia. Universal Expansion Joint Designed for a Refinery in Europe

U.S. Bellows designed and manufactured this universal expansion joint in accordance with ASME section VIII for an oil and gas refinery in Europe. A U2A- form was furnished as part of the units’ documentation. The expansion joint has a 24″ diameter and 103″ overall length. The bellows, liners and covers are fabricated from 316 stainless steel, and the flanges, tie-rods and pipe are carbon steel. The unit is designed for an operating temperature of 181°F at 101 psig and 1″ axial movement with a 3″ lateral offset. The bellows and pipe longitudinal weld seams were x-rayed, dye-penetrant and hydro- tested prior to shipment.

Fabric Expansion Joints Designed for an Exhaust Duct in a Gas Turbine Facility

September 16th, 2013 Comments off

Fabric Expansion Joints Designed for an Exhaust Duct in a Gas Turbine Facility

These fabric expansion joints were custom designed for an exhaust duct in a gas turbine facility in Europe. The 81″ x 18″ x 16″ face to face expansion joints have a integral stainless steel frame and liner with a reinforced red silicone fabric belt. The assemblies were manufactured for a 400°F operating temperature at +/-100 inches of water column pressure. The expansion joints were 100% dye pen tested before being shipped to the customer.

U.S. Bellows Fabric Expansion Joints Webinar

September 5th, 2013 Comments off

This webinar is over, view the recording at: http://info.usbellows.com/instantly-access-webinar-archives/

* Live Webinars are approved for 1 PDH credit for TX P.E.’s

Fabric Expansion JointsThis presentation will briefly touch on the basics of fabric expansion joints; however, is mainly focused on the various designs, material details, and applications. Learn how fabric expansion joints are engineered and fabricated for various applications and the many factors that influence those designs. View the abundance of materials used, including Fluoroplastic and Fluoroelastomer, and their respective capabilities. Take a journey through a Fossil Fired Power Plant and see exactly where fabric expansion joints are required.

60″ Dia. Elbow Pressure Balanced Expansion Joint Refurbished in 3 Weeks for a Power Generation Plant

September 3rd, 2013 Comments off

60" Dia. Elbow Pressure Balanced Expansion Joint Refurbished in 3 Weeks for a Power Generation Plant

This 60″ dia. x 20′ OAL elbow pressure balanced expansion joint was refurbished by U.S. Bellows in 3 weeks for a power generation plant in Wisconsin. The bellows are fabricated from Inconel 625 and the duct, elbow, cover and liner of carbon steel. The expansion joint was designed for 1″ axial movement at 715°F and 185 psig. The bellows longitudinal seams were 100% x-rayed prior to forming. After replacing the bellows, the expansion joint was dye penetrant tested and hydro tested at 185 psig.

Duct Work and Expansion Joint Assembly Custom Designed by U.S. Bellows for an Oil Refinery in California

August 11th, 2013 Comments off

Duct Work and Expansion Joint Assembly Custom Designed by U.S. Bellows for an Oil Refinery in California

This duct work and expansion joint assembly was custom designed by U.S. Bellows for an oil refinery in California. The project consists of 36″ x 48″ 304 stainless steel oval shaped duct work with a thick wall expansion joint and 30″ x 16″ carbon steel round shaped duct work. It is designed for 900°F at 13.2 psig, and the entire assembly was dye penetrant examined and 100% x-rayed prior to shipment.

20′ Rectangular Fabric Expansion Joint Custom Designed for a Plant in Louisiana

July 29th, 2013 Comments off

20' Rectangular Fabric Expansion Joint Custom Designed for a Plant in Louisiana

U.S. Bellows designed a 20′ x 13′ rectangular fabric expansion joint for a plant in Louisiana. This unit was custom designed to improve the current design by eliminating the need for insulation. The fabric belt consists of five layers and the frame is fabricated from 321 stainless steel. The expansion joint is designed for 1-7/8″ lateral movement at 1350°F and ± 10 psig and was dye penetrant tested prior to shipment.

62″ Fabric, 42″ Hinged and 42″ Tied Universal Expansion Joints and Duct Work Designed for an Acid Plant

July 13th, 2013 Comments off

62" Fabric, 42" Hinged and 42" Tied Universal Expansion Joints and Duct Work Designed for an Acid Plant

62" Fabric, 42" Hinged and 42" Tied Universal Expansion Joints and Duct Work Designed for an Acid Plant

U.S. Bellows custom designed two 42″ tied universal expansion joints, a 42″ hinged expansion joint and a 62″ fabric expansion joint in ductwork for an acid plant in Louisiana. The assemblies had flanged and flued head bellows fabricated from 304H stainless steel. The rest of the assemblies were made from carbon steel with operating temperatures of 700°F at 10 psig. The expansion joints were dye penetrant and x-ray tested prior to shipment.

Externally Pressurized Expansion Joints

June 30th, 2013 Comments off

Externally pressurized expansion joints are suited for piping systems that require large amounts of axial compression or extension. In externally pressurized expansion joints, the bellows elements are arranged so that the media flow is on the external surface of the bellows. Externally pressurizing the bellows eliminates pressure instability as a limitation to the design and permits the absorption of large amounts of axial expansion.

Typical movement conditions that occur in a piping system:

  • Installation: allow one cycle for installation misalignment
  • Start-up / Shut down: movements produced between the minimum ambient temperature and the maximum start-up temperature. This is normally a very low number of cycles.
  • Operating: movements produced due to temperature fluctuations during system operation. This is typically a very small movement for a very large number of cycles.
  • Excursion: movement resulting from a worst case / upset scenario, occurring during system operation. This is normally a very low number of cycles.

U.S. Bellows externally pressurized expansion joints are designed for 1000 cycles for any one tabulated movement shown. Movement may be increased, decreasing the cycle life, by using the graph below. This graph may also be used for superimposing more than one movement condition on the bellows at one time.

Cycle Life / Movement Conversion GraphRead more about Externally Pressurized Expansion Joints

 

59″ Dia. Single Hinged Expansion Joint Refurbished in Two Weeks

June 3rd, 2013 Comments off

59" Dia. Single Hinged Expansion Joint Refurbished in Two Weeks

Within a two week deadline, U.S. Bellows refurbished a 59-1/4″ diameter single hinged expansion joint for a refinery in Louisiana. The expansion joint is 119-3/4″ in overall length and designed for .82″ angular rotation at 1380°F and 35 psig. The bellows are fabricated from Inconel 625 LCF, and the entire assembly is 304H stainless steel. Before shipment, the bellows were x-rayed and the assembly was 100% dye penetrant and air tested to 52 psig.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy