This elbow pressure balanced expansion joint was designed for a chemical processing plant to aid the nitrogen oxide process for compound fertilizers. It is 18″ diameter with a face of weld-end to centerline of elbow length of 83- 3/8″. The body of the assembly, the pipe, covers and tie-rods were fabricated from 304L stainless steel, the bellows and liners from 321 stainless. This unit was designed for 1/2″ compression and 4-1/8″ lateral movement with an operating temperature of 600°F at 125 psig. The assembly was dye penetrant tested and hydro-tested at 190 psig prior to shipment.
U.S. Bellows designed and manufactured a 64” diameter custom elbow pressure balanced expansion joint for an exhaust duct in a power plant in Alberta, Canada. It is 386” in overall length and is fabricated from carbon steel with 321 stainless steel bellows. This expansion joint is designed for 1-1/8” axial movement, ½” lateral movement at 482°F and 174 psig. Tests performed on the unit include 100% dye penetrant, x-ray, and ultrasonic on pressure bearing welds. The unit was also hydrotested at 291 psig prior to shipment.