Expansion Joint Selection Tool — The Expansion Joints Blog

Archive

ASME Defines New Inspection Criteria for High Energy Pipelines

February 13th, 2012 Comments off

B31.1 Operations and Maintenance

According to ASME B31.1 Chapter VII Par. 140 a program shall be established for the assessment and documentation of the condition of all CPS (Covered Piping Systems) in power plants.

B 31.1 Operations and Maintenance

CPS Systems are defined in Chapter 1 Par 100.2, as systems on which condition assessments are to be conducted. This includes the following systems as a minimum.

NPS 4 and larger main steam, hot reheat steam, cold reheat steam, and boiler feedwater piping.

NPS 4 and larger systems that operate above 750°E (400°C or above 1,025 psi (7,100 kPa)

 

Other systems may be included as CPS by an Operating Company, based on their judgment. Appendix V of the code is titled ‘Recommended Practice for Operation, Maintenance, and Modification of Power Piping Systems’. This addendum is non-mandatory; however many  Power Industry operating companies’ insurance carriers are now invoking Appendix V with increasing frequency, and this is affecting conditions of their agreements with the operating companies.

Piping Technology and Products Inc. (PT&P) has for some time been performing surveys and assessments in accordance with part H of Par. 140, that requires hot and cold walk-down readings and assessment of pipe supports, operated within the creep regime of the pipe.    These assessments are helpful in identifying, sagging lines, deformation of supports, and damage caused by upset conditions, and/or incidents, attributable to operational malfunctions, dynamic/thermal or hydraulic events.

PT&P has been performing this service for many power generation companies. Preparation of documentation, retrieval and compilation of files for a CPS assessment, has just been completed for a major U.S power generation company. Ten large power plants were involved, and the original predominantly high-energy pipe support drawings, all engineered and designed by PT&P, were retrieved from PT&P archives dating back ten years.

Please feel free to contact us at david.baker@pipingtech.com and we will be happy to answer any of your technical questions about our survey capabilities, as well as any other engineering or field services that your organization may need.

Metal Attachment Styles for Fabric Expansion Joint Designs

January 30th, 2012 Comments off

Are there fabric expansion joints in your future? Are you looking to design or purchase a fabric expansion joint or just curious about the assortment of available frames? View different types of metal attachment styles for fabric expansion joint designs.

Metal Attachment Frames without Baffles (Liners)

 

Metal Attachment Frames with Baffles (Liners)

 

Metal Attachment Frames with Baffles and Insulation Pillows

 

New Expansion Joint Selection Chart

March 21st, 2011 Comments off

The Expansion Joint Selection Chart is a great tool for saving time when trying to narrow down your many options. Simply scan the chart for the movement your application requires, then read the description for further details on deflections, pressure thrust forces, etc.

Expansion Joint Selection Chart

Expansion Joint Selection Chart

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy