Pantographic Linkage — The Expansion Joints Blog

Archive

Universal Expansion Joint with Refractory Lining and Pantographic Linkage

December 9th, 2012 Comments off

U.S. Bellows, Inc. fabricated this 28″ dia., 109″ long universal expansion joint with 1″ thick AA-22 abrasion resistant refractory lining and pantographic linkage for a FCC unit in an oil refinery. The entire assembly is fabricated from 304H stainless steel with carbon steel pantographs. This expansion joint has two-ply testable bellows with wire mesh strip between the plies. It is designed for an axial movement of 5″, a lateral movement of 5-1/2″ at 1425°F and 45 psig. This unit was 100% dye penetrant tested, all pressure retaining welds were 100% radiographed and the unit was pneumatic tested prior to shipping to Oklahoma.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy