Pressure Balanced Tee Expansion Joint — The Expansion Joints Blog

Archive

Pressure Balanced Tee Expansion Joint Designed for a Boiler Feed Pump Turbine Exhaust

January 20th, 2013 Comments off

Pressure Balanced Tee Expansion Joint Designed for a Boiler Feed Pump Turbine Exhaust

This pressure balanced tee expansion joint was custom designed for a boiler feed pump turbine exhaust in a power plant. It is 96″ Dia. x 288″ OAL and fabricated from carbon steel with 304 stainless steel bellows, turning vanes and liners. It is designed for 2″ axial movement at 315°F and 15 psig. The expansion joint was dye penetrant examined, and a chemical cleaning of the interior surfaces was performed to remove any oil and grease. U.S. Bellows also performed a pneumatic test at 23 psig.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy