Rectangular Expansion Joints — The Expansion Joints Blog

Archive

128" x 229" Rectangular Fabric Expansion Joints

July 11th, 2007 Comments off
128" x 229" Rectangular Fabric Expansion Joints

128" x 229" Rectangular Fabric Expansion Joints

128" x 229" Rectangular Fabric Expansion Joints

Rectangular Fabric Expansion Joints

The fabric expansion joints shown above are fabricated with a three layer fabric belt. The three layers consist of an inner layer of silica cloth, a middle layer of mineral wool and an outer layer of PTFE/coated fiber glass. The frame includes an insulation blanket of mineral wool and stainless steel wire mesh. The frame and liner are fabricated from 3/8″ thick 304 stainless steel and each expansion joint’s frame and liner welds were dye-penetrant tested before shipping.

Design:
- Pressure: 1 PSIG
- Temperature: 1010°F
Design Movements:
- 2″ Axial Displacement
- 3/4″ Lateral Displacement

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy