Single Metallic Expansion Joints — The Expansion Joints Blog

Archive

18" Single Expansion Joints for an Offshore Oil Platform Under Construction in Korea

September 12th, 2007 Comments off
18" Single Expansion Joints for an Offshore Oil Platform Under Construction in Korea

18" Single Expansion Joints for an Offshore Oil Platform Under Construction in Korea

18" Single Expansion Joints for an Offshore Oil Platform Under Construction in Korea

Close up of Bellows

These expansion joints measure 18″ in diameter x 11″ in overall length. Each expansion joint is fabricated with 300 lb. stainless steel raised face slip on flanges. The liner, cover, and tie-rods are fabricated from 316L stainless steel.

18" Single Expansion Joints for an Offshore Oil Platform Under Construction in Korea

18" Single Expansion Joint

The design pressure is 403 PSI, and the design temperature is 200°F. Dye-penetrant tests, hydro-tests at 604 PSIG, and 100% x-ray tests of the bellows’ longitudinal weld seams were performed to assure quality.

border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2011  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy