| |
|
| Return to usbellows.com |
 Download Metallic Pipe Exapnsion Joint Catalog [PDF]
Download Fabric Expansion Joint Catalog [PDF] |
| Expansion Joint Data Tables |
- Single Expansion Joints
- Universal Expansion Joints
- 3, 3.5, 4 Inch Universal Expansion Joints
- 5, 6, 8 Inch Universal Expansion Joints
- 10, 12, 14 inch Universal Expansion Joints
- 16, 18, 20 Inch Universal Expansion Joints
- 22, 24, 26 Inch Universal Expansion Joints
- 28, 30, 32 Inch Universal Expansion Joints
- 34, 36, 38 Inch Universal Expansion Joints
- 40, 42 Inch Universal Expansion Joints
- 44, 46, 48 Inch Universal Expansion Joints
- 50 through 72 inch Universal Expansion Joints
- 84 through 144 Inch Unvirsal Expansion Joints
- Externally Pressurized Expansion Joints
-
|
| |
| U.S. Bellows Request for Quotation |
| |
|
|
Single Expansion Joint |
 |
|
|
< Back to Index
 |
|
 |
|
| Single Weld End |
|
Single Flanged End |
|
| |
|
 |
|
| |
|
Single Flanged Weld End |
|
3 inch Nominal Diameter
Effective (Thrust) Area: 12.76 in 2 (82.32 cm 2)
Notes:
- Rated life cycle at 650°F is 3000 cycles for any one tabulated movement.
- To combine axial, lateral and angular movements, please refer to the how to order section.
- To increase cycle life or movements, please refer to graph on cycle life.
- Rated bellows extension is equal to rated axial movement. Provided bellows is precompressed the amount of design extension. Installed overall length will decrease by the amount of precompression.
- Maximum test pressure: 1.5 X rated working pressure.
- Bellows rated for 650°F: See catalog flange data for appropriate flange temperature/pressure ratings.
- Torsional spring rate data provided only for modeling expansion joints on computer stress programs. Please consult factory for allowable torsional loadings.
- Overall lengths and weights for unrestrained expansion joints only. Consult factory for information regarding tied, hinged, or gimbal expansion joints.
- Pressure thrust load applied to adjacent pipe anchors/equipment when unrestrained expansion joints are used.
|
Diameter |
Pressure |
Overall Length and Weight |
Non-concurrant
movements |
Spring rates |
Flanged
Ends |
Weld
Ends |
Combination
Ends |
Axial |
Lateral |
Angular |
Axial |
Lateral |
Angular |
Torsional |
Overall Length |
Weight |
Overall Length |
Weight |
Overall Length |
Weight |
Compression |
PSIG |
in. |
lb. |
in. |
lb. |
in. |
lb. |
in. |
in. |
deg. |
lb./in. |
lb./in. |
in. |
in./lb./deg.
x 106 |
kg/cm2 |
mm |
kg |
mm |
kg |
mm |
kg |
mm |
mm |
Grad |
kg/mm |
kg/mm |
N-M/Grad |
N-M/Grad
x 105 |
3 |
170 |
6 |
7 |
12 |
6 |
9 |
7 |
0.92 |
0.28 |
10 |
304 |
560 |
11 |
0.0087 |
11.9 |
152 |
3.18 |
305 |
2.73 |
229 |
3.18 |
23.4 |
7.11 |
11 |
5 |
10 |
1.1 |
0.0088 |
90 |
9 |
7 |
15 |
7 |
12 |
7 |
1.87 |
1.03 |
10 |
169 |
93 |
6 |
0.0048 |
6.3 |
229 |
3.18 |
381 |
3.18 |
305 |
3.18 |
47.5 |
26.2 |
11 |
3 |
2 |
0.6 |
0.0049 |
40 |
12 |
8 |
18 |
7 |
15 |
8 |
2.84 |
2.27 |
10 |
117 |
31 |
4 |
0.0033 |
2.8 |
305 |
3.64 |
457 |
3.18 |
381 |
3.64 |
72.1 |
57.7 |
11 |
2 |
1 |
0.4 |
0.0034 |
3 |
500 |
6 |
27 |
12 |
6 |
9 |
17 |
0.36 |
0.08 |
10 |
2020 |
7142 |
72 |
0.0214 |
35.1 |
152 |
12.3 |
305 |
2.73 |
229 |
7.73 |
9.14 |
2.03 |
11 |
36 |
128 |
7.3 |
0.0217 |
500 |
9 |
28 |
15 |
7 |
12 |
18 |
0.77 |
0.36 |
10 |
943 |
726 |
33 |
0.0100 |
35.1 |
229 |
12.7 |
381 |
3.18 |
305 |
8.18 |
19.6 |
9.14 |
11 |
17 |
13 |
3.4 |
0.0101 |
250 |
12 |
29 |
18 |
8 |
15 |
19 |
1.3 |
0.93 |
10 |
615 |
201 |
22 |
0.0065 |
17.6 |
305 |
13.2 |
457 |
3.64 |
381 |
8.64 |
33 |
23.6 |
11 |
11 |
4 |
2.2 |
0.0066 |
Materials
Bellows: A240-T304. Alternate materials available upon request. Refer to the materials section.
Flanges: ASTM A105.
40-170 PSIG Series: 150 lb. ANSI B16.5 RFSO.
250-500 PSIG Series: 300 lb. ANSI B16.5 RFSO
Plate flanges and angle flanges available for low pressure systems.
Pipe: ASTM A53/A106.
40-70 PSIG Series: Std. Wt. Pipe.
250-500 PSIG Series: Std. Wt. Pipe
Liners: A240-T304.
Covers: Carbon steel.
Tie Rods, Hinges, Gimbals: Carbon steel
|
|
