border  
index
 
 
Loading
Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
left border  

 

Early Warning Detectors for Expansion Joint Failure

By John Demusz
September 15, 2010

Frequently operating plants with critical applications desire the ability to monitor the condition of a bellows element, so if a problem arises, timely plans can be made to replace the bellows. The two-ply testable bellows element has this ability with two unique features. First, both plies are redundant and capable of withstanding the system pressure and temperature. Second, the space between the plies can be monitored for changes in pressure, so that if a leak were to develop on the inner ply, the outer ply will continue to operate and the system pressure would be indicated by the activation or the orange pop top.

The orange top remains passive until there is a leak in the inside ply causing pressure to build up between the plies causing the early warning orange top to activate and pop up.

  Picture of a clamshell bellows being repaired.

Features:

  • Acts as an early warning of a bellows leak when the orange top pops up.

  • Two-ply bellows are designed for 100% redundancy. Each ply is designed to take the full pressure and temperature.

  • The critical piping system continues to operate while the plans for replacement are formulated.

  • Eliminates downtime in critical high risk piping systems where a leaking bellows could cause an outage and shutting down the plant until the bellows can be replaced.

Cost Savings:

The two-ply bellows with a leak detector will add 15% to 30% to the initial cost of the bellows itself. This is a real cost saving considering the effect of a failed bellows in a critical piping system that could shut down an operating plant. By using the orange pop top, the end user minimizes potential downtimes in high risk services where a bellows failure could cause an unscheduled shutdown.

 

 

 

   
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy