border  
border
 
 
  view-our-instant-pricing-sheet
Loading

Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
left border
 

FEATURED PRODUCT ARCHIVES >>


U.S. Bellows/PT&P Manufactures 36" Gimbal Expansion joints for Petrochemical Company in California -- 08/04/99 

In 1999, U.S. Bellows, Inc., fabricated three 36" diameter single gimbal expansion joints for a large petrochemical company in California. These expansion joints are designed for 750 PSIG and 275° F. The design pressure thrust is approximately 1,000,000 lbs and the hydro-test pressure thrust is approximately 1,500,000 lbs. Fabricated from Inconel 625 material, these expansion joints are equipped with testing ports to detect leakage in between the two plies. The gimbal ring, hinges, standoff, and pins have all been designed to withstand the design and hydro-test pressure thrust force. The total assembled weight of each expansion joint is 14,560 lbs. Gimbal expansion joints allow for restrained angular movement of attached piping in two planes. Expansion joints, in general, allow for axial, lateral, angular and torsional movement in piping systems.


 
 
 

pixel pixel
bottom
 

Explore U.S. Bellows
share share
bottom
 
 
Free Software
share share
bottom
 
 
 
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy