border  
border
 
 
  view-our-instant-pricing-sheet
Loading

Contact Us:
+1 (281) 241-9418 Toll Free: (855) 591-0906
Se habla espaņol
left border
 

SERVICES

orange squares Expansion Joint Product Testing: Burst Testing


Objective: The objective of the burst test is to determine the ultimate pressure resistance that a bellows can absorb prior to failure. Burst tests help determine the margin of safety and safety factor to be used in a specialized bellows design.
What we do: During a burst test, hydrostatic pressure is slowly increased until failure occurs, which usually happens in one to two hours. Burst testing is conducted at ambient temperatures to determine a bellows pressure rating. We follow all the necessary safety precautions for personnel involved, such as placing the bellows in a high strength steel cage and using a safety shut-off switch.
After Completion: Based on the burst test results, a safety factor is applied, thus establishing the ultimate pressure rating.

 

Burst test to 800 psig on a 304 stainless steel bellows Q.C. inspecting a 304 stainless steel bellows undergoing a burst test to 800 psig
Burst Test to 800 psig on a 304 Stainless Steel Bellows  Q.C. Inspecting the Bellows After a Burst Test

 

pixel pixel
bottom
 

Explore U.S. Bellows
share share
bottom
 
 
Free Software
share share
bottom
 
 
 
border

Contact Us: +1 (281) 241-9418 Toll Free: (855) 591-0906 Fax: +1 (713) 731-8640 sales@usbellows.com
Our Parent Company: Piping Technology Pipe Supports, Pipe Clamps, Pipe Hardware & Insulated Pipe Shoes
Fellow Subsidiaries: Sweco Fab: ASME Vessels, Pig Launchers, Duct Work, Strainers & Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces


Copyright © 2017  U.S. Bellows, Inc. All Rights Reserved. Privacy Policy