Request A Quote

EPDM Rubber Expansion Joints for a Water Cooling Loop at a Chemical Plant in Saudi Arabia

September 5, 2017

EPDM Rubber Expansion Joints for a Water Cooling Loop at a Chemical Plant in Saudi Arabia

Type: EPDM Rubber Expansion Joints
Size: 9″ Diameter & 10″ Face-To-Face
Design: EPDM Rubber/Carbon Steel
Material: 250°F at 225 psig, 3.5″ Axial Compression & 1.5″ Lateral Deflection
Testing: Hydro tested

U.S. Bellows furnished these EPDM rubber expansion joints for a water cooling loop at a chemical plant in Saudi Arabia. The bellows are twin-open arch EPDM rubber and have a set of galvanized carbon steel retaining rings. The units are 10″ face-to-face and 9″ in diameter. They are designed for an operating temperature of 250°F at 225 psig with 3.5″ of axial compression, 1.5″ of lateral deflection, and 4° of angular rotation. The units were hydro tested at 1.5 times their design pressure prior to shipment.

Top