Request A Quote

Rectangular Rubber Expansion Joints for Centrifuge Suction and Discharge of Paraxylene Application at a Chemical Plant

May 21, 2018

Rectangular Rubber Expansion Joints for Centrifuge Suction and Discharge of Paraxylene Application at a Chemical Plant

Type: Rubber Expansion Joint
Size: 59.5″ x 20.25″ x 14″ FTF | 29.875″ x 22.75″ x 14″ FTF
Design: Viton Rubber | 304 Stainless Steel | Carbon Steel
Material: 250°F, 5 psig, & 0.25″ Axial & Lateral
Testing: Hydro-tested at 5 psig

These rectangular Viton rubber expansion joints were custom designed for a suction and centrifuge discharge of paraxylene application at a chemical plant in India. The units are 59.5″ x 20.25″ x 14″ face-to-face and 29.875″ x 22.75″ x 14″ face-to-face. The belt material is made from Viton rubber with 304 stainless steel liner and carbon steel retaining bars. They are designed for an operating temperature up to 250°F at 5 psig, with 0.25″ of axial compression and lateral deflection. The units were hydro-tested to 5 psig prior to shipment.

Read More

42″ I.D. Rubber Expansion Joints for Power Plant in Texas

September 23, 2004

Expjt 00466 rubbera
42″ Dia. Rubber Expansion Joints for a Power Plant

U.S. Bellows, Inc. designed and fabricated a 42″ I.D. rubber expansion joint for a power plant in Texas.  The expansion joint consists of a bellow formed by 1/8″ thick neoprene sheet and A36 carbon steel flanges coated with a special finish per customer’s request. To ensure quality, dye-pentrant testing was performed on the welds prior to shipping.

Read More
Top