Request A Quote

Three-day Emergency Fabrication of a 40″ I.D., Clamshell Expansion Joint for a Chemical Plant in Texas

January 18, 2002

Three-day Emergency Fabrication of a 40" I.D., Clamp Shell Expansion Joint for a Chemical Plant in Texas

Three-day Emergency Fabrication of a 40″ I.D., Clamshell Expansion Joint for a Chemical Plant in Texas

Within a three day span, U.S. Bellows, Inc., the expansion joint division of Piping Technology & Products, Inc., fabricated a 40 I.D., single coded, clamshell expansion joint for a chemical plant in Beaumont, Texas. The chemical company utilized U.S. Bellows’ 24 x 7 Quick Turn/Emergency service.

Three-day Emergency Fabrication of a 40" I.D., Clamp Shell Expansion Joint for a Chemical Plant in Texas

Quality Control Performing Dye Penetrant Test.

After the representative from the chemical plant completed the online form, the U.S Bellows’ on-call team was immediately paged. Three days later the bellow had been successfully fabricated, welded to an A516-70 heat exchanger shell and shipped to the chemical plant to resume operation. The bellow was fabricated from A240 tp 321SS and designed at 50 PSIG and 750oF. In order to detect any leaks in the weld, the bellow’s long seam weld was 100% x-rayed and its attachment weld was 100% dye-penetrant.

Read More

Externally pressurized expansion joints for steam plant in Kent, Ohio

January 11, 2002
Externally pressurized expansion joints for steam plant in Kent, Ohio
Externally pressurized expansion joints for steam plant in Kent, Ohio

U.S. Bellows/PT&P specially designed and fabricated 40 externally pressurized expansion joints for the piping system of a steam plant in Kent, Ohio. The sizes of the expansion joints ranged from 10 to 24. The expansion joints were designed at 150 psig and 350 °F for a maximum of 4 compressions and fabricated with 304 SS bellows and carbon steel shell and flanges. The joints were leak tested before shipment.

Read More

71″x143″ Rectangular Expansion Joint for an Oil Refinery in India

January 4, 2002
71"x143" Rectangular Expansion Joint for an Oil Refinery in India
71″x143″ Rectangular Expansion Joint for an Oil Refinery in India

U.S. Bellows, Inc., the expansion joint division of Piping Technology & Products, Inc., designed and fabricated a 71 x 143 rectangular expansion joint for an oil refinery in India. The expansion joint was fabricated from SS 316 L, designed at 18 psig at 417°F. It is equipped with a liner and rounded corner bellows design. EJMA Standards and B31.3 code were used in the design and fabrication of this joint.

Read More
Top