Request A Quote

42″ Dia. Single Tied Expansion Joints Designed for a Solar Electric Generation Facility

November 26, 2012

42" Dia. Single Tied Expansion Joints Designed for a Solar Electric Generation Facility

Type:  Single Expansion Joint
Size:  40″ and 42″ diameter
Material:  304 Stainless Steel | Carbon Steel
Design  lateral movement of 1/2″, and 15 PSIG at 250°F
Testing:  100% Dye-penetrant | Hydro-tested

These single tied expansion joints are 40″ and 42″ diameter and were designed for a solar electric generation facility. The bellows and flow liner are 304 stainless steel. The stub ends are fabricated from carbon steel. The expansion joints were designed for a lateral movement of 1/2″, and 15 PSIG at 250°F. They were 100% dye penetrant examined and hydro-tested prior to shipping to California.

Read More

60″ Dia. Pressure Balanced Elbow Expansion Joint for a Power Generation Plant

November 5, 2012

121832a1
60″ Dia. Pressure Balanced Elbow Expansion Joint for a Power Generation Plan
This pressure balanced elbow expansion joint is 60″ diameter and 240″ overall length and was custom designed for a power generation plant in South Carolina. It was fabricated from carbon steel with 304 stainless steel bellows. The expansion joint was designed for an axial compression of 1″, lateral of 1″, and 100 PSIG at 100°F

Read More
Top